Reverse Demulsifier manufacturer and supplier in Fujairah, Dubai, Ajman, Kuwait, Iraq, Sharjah, UAE Middle East, Ruwi Barka, Sohar, Muscat Oman, Mumbai, Kakinada, Kandla Gandhidham Surat GIDC, Visakhapatnam, Chennai, Ennore, Kolkata HALDIA, Paradip, Nairobi Kenya, Africa, Sudan, Yemen, Canada
RXSOL Reverse Demulsifier is a proprietary blend of surfactants designed to release emulsified crude oil from the water phase.RXSOL Reverse Demulsifier is a fast acting demulsifier which liberates the oil and leaves a clear water phase.
What is Reverse Demulsifier?
Demulsifier, or Reverse Demulsifier, Crude oil Demulsifier, emulsion breaker, is a Oil Field specialized Chemicals to separate water from oil. Reverse Demulsifier can be applicable to Light, Medium, Heavy crude oils. :
Answer :
Reverse Demulsifiers—-Break oil-in-water emulsions
Precautions For Use:
Exposure limits | : No limits applicable. |
Personal protection | : The use of rubber gloves and eye protection is advised. |
Ventilation | : Adequate ventilation is advised. |
Flammability | : Non flammable |
Environment | : Use commercial absorbents and standard clean-up methods, adhere to State and Federal Laws. The product is not regarded as harmful to the environment |
Advantage :
- Fast acting demulsification of crude oil
- Extremely effective for high water cut emulsions.
Typical Properties
Appearance | : | Clear Amber Liquid |
Specific Gravity | : | 1.0 @ 20°C |
pH | : | 6.0 – 7.0 |
Boiling Point | : | 100°C |
Flash Point | : | Non Flammable |
Odour | : | Slight |
RXSOL Reverse Demulsifier is used for breaking oil in water emulsions. It is a powerful flocculant to clarify oily water from produced water. It is water soluble and effectively cleans the produced water from oil. It can be also used for Produced Water from Separators, Tanks, Inert Gas Floatation Unit, Free Water Separators etc. It is an efficient flocculating agent and increases the Floc Size of previously flocculated suspensions. A greater Floc promotes faster settling and improves the filtration rate.
Designed to reduce suspended solids in raw and wastewater. It will also reduce the need for inorganic coagulants such as alum or iron salts. It can also reduce or eliminate the need for post pH Adjustment since it does not affect the pH of the water.
Recommended dosage 1 – 20 ppm continuous injection at the wellhead based upon water production and the degree of emulsification.