Skip to main content
Title
Marine Clean SC
SKU
RXSOL-20-2010-210
Supply Location::
Locations

NON- CAUSTIC BASED Marine clean SC is  is a superior and powerful Tank Cleaner manufacturer and supplier in Kakinada, Visakhapatnam, Chennai Ennore, Kolkata, Haldia, Mumbai JNPT, Kandla Mundra Hazira, Paradip, Fujairah, Abudhabi, Dubai Sharjah UAE Middle East, Sohar, Muscat Oman, Canada, Mombasa Nairobi, Kenya

Category
Tank Cleaner-20
SHORT DESCRIPTION:::

Marine clean SC is  is a superior NON- CAUSTIC BASED Biodegradable cleaner which is developed for use in TANK and other systems containing aluminium and other soft metal. It is also novel blend of organic and inorganic corrosion inhibitors, including molybdate, intended to protect steel, copper and other nonferrous metals. RXSOL-20-2010-210 strong non-caustic surfactant basis Tank cleaning and degreasing Product. It is based on the latest and most powerful biodegradable Surface Active and emulsifying agents. It contains fatty alcohol etoxylates, metasilikates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal for soot removing and cleaning of extremely dirty tanks after Mineral Oils /Petroleum Products. Note. All cleaning chemicals have reduced effect with seawater.
Excellent Eco-friendly product

Suitable on all common metals & coatings
 

PRODUCT REMARK:::
Remarks

FIRST AID MEASURES:

General:

Remove patient from source of contamination. If unconscious, loosen tight clothing and place patient in recovery position. Never give anything to drink to an unconscious person. Ensure open respiration passage. Seek medical attention if in doubt, show label / MSDS.

Inhalation:

Ensure fresh air and rest.

Skin contact:

Contaminated skin should be rinsed with plenty water.

Eye contact:

Immediately flush with plenty of water for at least 15 minutes. Keep eyes open. Seek medical attention/transportation to hospital. Flush during transport.

Ingestion:

Rinse mouth with water, drink plenty of water, or preferably milk. Consult a doctor if necessary.

PROTECTION AGAINST FIRE AND EXPLOSION

Extinguishing media

Extinguish surrounding fires with suitable extinguisher.

Storage:

Store frost-free, preferably at room temperature. Store in closed containers. Keep away from children.

Handling:

Use rubber or plastic gloves.

Special precaution:

Can degrease skin and squirts will irritate the eyes.

> TAG IDENFIFICATION::: FIELD NOTE:::
Technical Specifications

 


 

OdourOdourless
AppearanceLiquid, colourless to yellow, soluble in water
pH11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration
Boiling point>100 °C at 760 mm /Hg
Vapour pressureNot known
Vapour densityNot applicable
Freezing point5 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)1.23
Application


 . Non-Flammable

• Leaves no film in the cargo tanks

• Easy to apply. Effective and economical in use

• Suitable in sea & fresh water

• Contains no ethoxylated nonylphenol (NF)

• Biodegradable

Dose

Prior to use of any chemicals, make sure the tanks and lines are well stripped and drained. A proper pre-cleaning will reduce the amount of chemicals required. Further, do not overheat as this may change the characteristic of the cargo and in some cases burn the cargo to the bulkhead. Carefully read the cargo specification.

For vegetable, animals, and fats: Tanks containing drying or semi-drying oils should be flushed or pre-washed or moisten as soon as possible after completion of discharging to prevent formation of hard tenacious residues. The temperature used for pre-cleaning will depend on whether the cargo is drying, semi-drying or non-drying, and the cargoes melting point. Thus an individual cleaning operation should be made for each cargo.

Due to the fact that the zinc is porous, a prolonged pre-cleaning with lower temperatures is highly advisable prior to introduction of chemicals on such lining.

Re-circulations:

1. Flush tanks with ambient seawater to remove remaining cargo to slop. (As per MARPOL 78/73)

2. Recycle tanks with increasing temperature for 2-8 hr, depending cargo and size of tank. This is a very important operation, as it will remove oily-mud and residues in the coating/steel.

3. Make a mixture with fresh water and 0,5 -2 % Marine clean SC. Insert the mixture into the tank and commence the re-circulation wash for 2-8 hr. Increased temperatures will improve the cleaning result. Maximum effect from chemical at 650C. Do not overheat, as this may burn the cargo.

4. Flush tanks with large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.

5. Flush tanks with freshwater to remove salts, mop and dry.

Spot cleaning after most CPP / hydrocarbons.

1. Marine clean SC may be sprayed on the bulkhead neat or diluted, to areas where residues remain after tank washing, “Spot Cleaning”. A heated dilution is found to be very efficient.

2. Product should be allowed to stand for 10-30 minutes prior to re-washing areas. Do not leave the product to dry on bare coating.

3. Clean areas by flushing manually with high pressure, using fresh water, or by performing a re-circulation. For persistent deposits, agitation by scrubbing will assist the cleaning operation. Heated water will increase the cleaning effect .

About

We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Contact info

logo

Duis aute irure dolor in reprehen derit in voluptate velit esse cillum dolore eu.

Featured Post