SKU
RXSOL-20-2035-210
Title
Tankclean ECO
Title
Tankclean ECO
Packing Sizes
Active Matter
Supply Location
Locations
<p style="text-align: justify;">
Tank clean ECO supplier in Mumbai, Nhava Seva, Surat - Hazira, Kandla - Deen Dayal Port, Mundra, Sikka, Jamnagara, Hazira Surat, Gandhidham, Manglore, Goa, Visakhapatnam - Gangavaram, Chennai - Ennore, Kolkata - Haldia - Buz Buj, Paradip. We are also one of largest tanclean ECO supplier in Fujairah, Dubai, Sharjah, Abu Dhabi - Middle East, UAE, Sohar, Muscat Oman</p>
Category
Tank Cleaner-20
Short Description
<p>
<strong style="font-size: 16px;">Powerful & Concentrated Emulsifying Cleaner, Classified Heavy-Duty Degreaser for Oil, Grease, and Sludge Removal</strong><span style="font-size: 16px;">. Tankclean ECO is concentrated formulation </span><em style="font-size: 16px;">designed to break down and emulsify heavy oils, grease, carbon deposits, removal of coaltar, crude benzene, lube oils, Petroleum distillate, pyrolyze gas oil, bitumen & similar and petroleum-based sludge.</em><span style="font-size: 16px;"> It is especially effective in demanding environments such as marine vessels, refineries, engine rooms, and industrial plants.</span></p>
Product Remarks
Remarks
<div style="text-align: justify;">
During Tank Cleaning operation, Re-circulation method can be considered one of POPULAR METHOD. TIPS for uses of TANK CLEAN ECO.</div>
<div style="text-align: justify;">
1. First of all remove and strip all residue manually from Tank bottom and wall, Then flush tanks with the copious amount of seawater if possible by using the high-pressure machine to remove remaining cargo to slop. (As per MARPOL 78/73)<br />
</div>
<div>
2. Then recirculate hot water inside the tanks at least for 2-10 hr, this will helps to remove oily-mud and residues in the coating/steel.<br />
</div>
<div style="text-align: justify;">
3. Then again take fresh hot water inside the tank and use Tank Clean ECO 0.5 - 2 %. And continue recirculation 2-8 hr. And continuously try to maintain temperature of 60 - 65 Degree Centigrade. Hot recirculation will improve the cleaning result. Do not overheat, as this may burn the cargo. otherwise, The water is heated by means of the heating coils, cargo heat exchanger or Butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on the type of cargo).<br />
</div>
<div style="text-align: justify;">
4. Again Flush entire tanks with a large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.<br />
5. Flush tanks with freshwater to remove salts, mop and dry.</div>
<div style="text-align: justify;">
<br />
<br />
RXSOL TANK Clean ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.<br />
</div>
Tag Identification
Tag Identification
<div style="text-align: justify;">
<h3 data-end="620" data-start="596">
<strong data-end="620" data-start="603">Key Features of Tankclean ECO:</strong></h3>
<ul data-end="1263" data-start="622">
<li data-end="744" data-start="622">
<p data-end="744" data-start="624">
<strong data-end="653" data-start="624">Strong Emulsifying Action</strong>: Breaks down stubborn hydrocarbon residues and converts them into easy-to-rinse emulsions.</p>
</li>
<li data-end="836" data-start="745">
<p data-end="836" data-start="747">
<strong data-end="770" data-start="747">Highly Concentrated</strong>: Can be diluted for economy or used neat for tough cleaning jobs.</p>
</li>
<li data-end="963" data-start="837">
<p data-end="963" data-start="839">
<strong data-end="868" data-start="839">Multi-Surface Application</strong>: Safe for use on steel, painted surfaces, and most industrial equipment when used as directed.</p>
</li>
<li data-end="1090" data-start="964">
<p data-end="1090" data-start="966">
<strong data-end="983" data-start="966">Versatile Use</strong>: Suitable for cleaning tanks, bilges, engine parts, floors, cargo holds, machinery, and workshop surfaces.</p>
</li>
<li data-end="1175" data-start="1091">
<p data-end="1175" data-start="1093">
<strong data-end="1111" data-start="1093">Water Rinsable</strong>: Leaves residue free after rinsing with fresh water.</p>
</li>
</ul>
</div>
<div style="text-align: justify;">
</div>
<div style="text-align: justify;">
#TankCleanECO_KandlaMundraMumbaiChennaiVisakhapatnamKolkata<br />
#TankCleanECO_DubaiSoharMuscatSharjahAjmanSalalah</div>
Field Note
Note
<div>
Description</div>
<div>
Tank Cleaner Eco is “the strongest there is” water-based, non-caustic cleaning and degreasing agent. It is based on</div>
<div>
the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol ethoxylates metasilicates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal</div>
<div>
for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning</div>
<div>
chemicals have reduced effect with seawater.</div>
<div>
Product benefits, Application & Features:</div>
<div>
• Non-Flammable • Suitable in sea & fresh water</div>
<div>
• Leaves no film in the cargo tanks • Biodegradable</div>
<div>
• Easy to apply. Effective and economical in use • Contains no ethoxylated nonylphenol (NF)</div>
Technical Specifications
<p>
Properties:<br />
Specific gravity (at 20°C) : 1.05<br />
Flash point (10%) : Non Flammable<br />
pH (10%) : 12.0 - 12.5<br />
Colour : Clear<br />
Odour : Citrus</p>
<p>
</p>
<h3 data-end="1469" data-start="1439">
<strong data-end="1469" data-start="1445">Application Methods For Tank Clean ECO:</strong></h3>
<ul data-end="1536" data-start="1470">
<li data-end="1477" data-start="1470">
<p data-end="1477" data-start="1472">
Spray</p>
</li>
<li data-end="1485" data-start="1478">
<p data-end="1485" data-start="1480">
Brush</p>
</li>
<li data-end="1492" data-start="1486">
<p data-end="1492" data-start="1488">
Soak</p>
</li>
<li data-end="1536" data-start="1493">
<p data-end="1536" data-start="1495">
Circulation or high-pressure wash systems</p>
</li>
</ul>
Application
<h3 data-end="1302" data-start="1270">
<strong data-end="1302" data-start="1277">Common Recommended Dilution of Tank Clean ECO:</strong></h3>
<ul data-end="1432" data-start="1304">
<li data-end="1359" data-start="1304">
<p data-end="1359" data-start="1306">
<strong data-end="1324" data-start="1306">Heavy Deposits</strong>: Use undiluted or 1:1 with water</p>
</li>
<li data-end="1432" data-start="1360">
<p data-end="1432" data-start="1362">
<strong data-end="1380" data-start="1362">Light Cleaning</strong>: Dilute up to 1:10 depending on contamination level</p>
</li>
</ul>
<p style="text-align: justify;">
</p>
<p style="text-align: justify;">
<span style="font-size: 14px;">RXSOL Tankclean Eco is designed for the removal of: heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.</span></p>
Industrial Area
<p style="text-align: justify;">
Tank Clean ECO is one of popular and classified marine Tank Cleaner. TANK CLEAN ECO is a highly concentrated natural based cargo tank cleaner. It is free from chlorinated/aromatic hydrocarbons, caustic and alkalines. It can be used for the cleaning of palm oil, vegetable oil, fish oil and soybean oil from cargo tank surfaces.</p>
Dose
<p style="text-align: justify">
<span style="font-size:16px;">Directions of use</span><br />
Cleaning of cargo and storage tanks by means of recirculation method.</p>
<p style="text-align: justify">
Pre Wash :-<br />
Before cleaning with RXSOL Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending on the type of cargo.<br />
<br />
<span style="font-size:14px;">Recirculation Method</span> ::: Refer Below.<br />
<br />
<span style="font-size:14px;">Direct Injection</span>:-<br />
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.</p>
Useful Area
<div>
ZINC coating TANK cleaning - Zinc structure is porous, a prolonged pre-cleaning with lower temperatures is highly advisable.</div>
<div>
</div>
<div style="text-align: justify;">
<span style="text-align: justify;">HEAVY DUTY TANKCLEANER MANUFACTURED FROM NATURAL RAW MATERIALS WHICH CONTAINS NO CHLORINATED OR AROMATIC HYDROCARBONS</span><br style="text-align: justify;" />
<span style="text-align: justify;">• More effective than solvent cleaners.</span><br style="text-align: justify;" />
<span style="text-align: justify;">• Non-toxic and environmentally safe.</span><br style="text-align: justify;" />
<span style="text-align: justify;">• Safe to use because of its high flashpoint.</span><br style="text-align: justify;" />
<span style="text-align: justify;">• Completely biodegradable.</span><br style="text-align: justify;" />
<span style="text-align: justify;">• Replaces most conventional tankcleaners and cleaners.</span></div>
Keywords
<div style="text-align: justify;">
<span style="font-size:16px;">Tankclean ECO effectively cleans vegetable, animals, and fats. Tanks containing drying or semi-drying oils should be flushed or prewashed or moisten as soon as possible after completion of discharging to prevent the formation of hard tenacious residues.</span><br />
<br />
Expert suggestion: To save tank cleaner, strip all residue manually which will reduce the quantities and consumption of chemicals required. Never overheat the tank which may cause dryness of residue.<br />
<br />
<div>
Spot cleaning after most CPP / hydrocarbons.</div>
<div>
1. Tank Cleaner Eco may be sprayed on the bulkhead neat or diluted, to areas where residues remain after tank washing, “Spot Cleaning”. A heated dilution is found to be very efficient.</div>
<div>
2. The product should be allowed to stand for 10-30 minutes prior to re-washing areas. Do not leave the product to dry on the bare coating.</div>
<div>
3. Clean areas by flushing manually with high pressure, using fresh water, or by performing a re-circulation. For persistent deposits, agitation by scrubbing will assist the cleaning operation. Heated water will increase the cleaning effect.</div>
</div>
